The Importance of Insulated Flue Pipes in Your Attic


The Importance of Insulated Flue Pipes in Your Attic Yo […]

The Importance of Insulated Flue Pipes in Your Attic

You might have noticed that some homes have a lot of aluminum flue pipe in their attics. This piping is used to vent gases that are produced when burning fuel. These gases, including carbon monoxide, heat the attic and are hazardous. If you're not sure why it's important to have an insulated flue pipe in your attic, read on to learn more about the importance of proper piping in your attic.

Flue pipes made from aluminium are suitable for gas boilers with a maximum flue gas temperature of 200degC. They're also condensate-resistant and available in single and concentric configurations. Flue pipes with a 60/100 mm diameter are generally concentric and can be used for single wall or separate intake and exhaust. The length of each pipe depends on the type of boiler and how much flue gas the boiler produces.

When making a repair or replacing an aluminum flue, take pictures of the flue vent connector to ensure that it's properly sealed. A poorly-fitting connector can cause carbon monoxide leaks and can cause CO poisoning. When removing an aluminum flue, make sure the connectors have female ends facing up, which prevents buildup from forming inside the vent. You can use foil tape to join the pipes, if they're made of metal.

Stainless steel and aluminum flue pipes are made of the same metal, but they have different properties. Stainless steel is strong, durable, and resistant to corrosion. This pipe can be used for noncondensing gas, oil, or wood burning appliances. It is much easier to install and maintain than standard stainless steel pipe. It is corrosion-resistant and has a check valve on both sides. Unlike aluminum flue pipe, stainless steel pipes have a low melting point.

Views: 209